Precision Assembly Technologies and Systems
Svetan Ratchev |
Front Matter |
Part I: Design of Micro Products
|
Design for Micro-assembly
|
Analysis of the Applicability of Design for Microassembly Theory to Biomedical devices
Carsten Tietje, Daniel Smale, Steve Haley, Svetan Ratchev |
5-12 |
A Haptic Tele-operated System for Microassembly
P. Estevez, S. Khan, P. Lambert, M. Porta, I. Polat, C. Scherer, M. Tichem, U. Staufer, H. H. Langen, R. Munnig Schmidt |
13-20 |
Neutral Interface for Assembly and Manufacturing Related Knowledge Exchange in Heterogeneous Design Environment
Minna Lanz, Roberto Rodriguez, Pasi Luostarinen, Reijo Tuokko |
21-29 |
Tolerancing for Micro-assembly
|
Defining Tolerances in Assembly Process with the Aid of Simulation
H. -A. Crostack, R. Refflinghaus, Jirapha Liangsiri |
33-40 |
Assembly Analysis of Interference Fits in Elastic Materials
Kannan Subramanian, Edward P. Morse |
41-49 |
How Form Errors Impact on 2D Precision Assembly with Clearance?
Pierre-Antoine Adragna, Serge Samper, Hugues Favreliere |
50-59 |
Part II: Micro-assembly Processes
|
Development of Micro-joining Processes
|
Precision Assembling and Hybrid Bonding for Micro Fluidic Systems
Agathe Koller, Manuel Altmeyer, Silvio Walpen |
65-72 |
Feasibility of Laser Induced Plasma Micro-machining (LIP-MM)
Kumar Pallav, Kornel F. Ehmann |
73-80 |
Focused Ion Beam Micro Machining and Micro Assembly
Hongyi Yang, Svetan Rachev |
81-86 |
Innovative Assembly Processes
|
Hybrid Assembly for Ultra-Precise Manufacturing
Alexander Steinecker |
89-96 |
Development of the Roll Type Incremental Micro Pattern Imprint System for Large Area Pattern Replication
Jung-Han Song, Hye-Jin Lee, Shuhuai Lan, Nak-Kyu Lee, Geun-An Lee, Tae-Jin Lee, Seogou Choi, Sung-Min Bae |
97-104 |
Utilisation of FIB/SEM Technology in the Assembly of an Innovative Micro-CMM Probe
Daniel Smale, Steve Haley, Joel Segal, Ronaldo Ronaldo, Svetan Ratchev, Richard K. Leach, James D. Claverley |
105-112 |
Metrology and Control for Micro-assembly
|
Miniaturized Camera Systems for Microfactories
Timo Prusi, Petri Rokka, Reijo Tuokko |
115-122 |
Vision and Force Sensing to Decrease Assembly Uncertainty
R. John Ellwood, Annika Raatz, Jürgen Hesselbach |
123-130 |
Modelling the Interaction Forces between an Ideal Measurement Surface and the Stylus Tip of a Novel Vibrating Micro-scale CMM Probe
J. D. Claverley, A. Georgi, R. K. Leach |
131-138 |
Part III:Innovative Assembly Processes
|
High Precision Positioning and Alignment Techniques
|
Alignment Procedures for Micro-optics
Matthias Mohaupt, Erik Beckert, Ramona Eberhardt, Andreas Tünnermann |
143-150 |
Pneumatic Driven Positioning and Alignment System for the Assembly of Hybrid Microsystems
Christian Brecher, Martin Freundt, Christian Wenzel |
151-158 |
Flexure-Based 6-Axis Alignment Module for Automated Laser Assembly
Christian Brecher, Nicolas Pyschny, Jan Behrens |
159-166 |
Approach for the 3D-Alignment in Micro- and Nano-scale Assembly Processes
Thomas Wich, Christian Stolle, Manuel Mikczinski, Sergej Fatikow |
167-173 |
Guidelines for Implementing Augmented Reality Procedures in Assisting Assembly Operations
Viviana Chimienti, Salvatore Iliano, Michele Dassisti, Gino Dini, Franco Failli |
174-179 |
Monodirectional Positioning Using Dielectric Elastomers
C. Pagano, M. Malosio, I. Fassi |
180-187 |
Gripping and Handling Solutions
|
Active Gripper for Hot Melt Joining of Micro Components
Sven Rathmann, Annika Raatz, Jürgen Hesselbach |
191-198 |
Grasping and Interaction Force Feedback in Microassembly
Marcello Porta, Marcel Tichem |
199-206 |
Low Voltage Thermo-mechanically Driven Monolithic Microgripper with Piezoresistive Feedback
Vladimir Stavrov, Emil Tomerov, Chavdar Hardalov, Daniel Danchev, Kostadin Kostadinov, Galina Stavreva, Evstati Apostolov, Assen Shulev, Anna Andonova, Mohammed Al-Wahab |
207-214 |
Improvement of Robotic Micromanipulations Using Chemical Functionalisations
Jérôme Dejeu, Patrick Rougeot, Michaël Gauthier, Wilfrid Boireau |
215-221 |
Positioning, Structuring and Controlling with Nanoprecision
Regine Hedderich, Tobias Heiler, Roland Gröger, Thomas Schimmel, Stefan Walheim |
222-226 |
Challenges of Precision Assembly with a Miniaturized Robot
Arne Burisch, Annika Raatz, Jürgen Hesselbach |
227-234 |
Part IV: Development of Micro-assembly Production Systems
|
Modular Reconfigurable Assembly Systems
|
Application of a Reconfiguration Methodology for Multiple Assembly System Reconfigurations
D. Smale, S. Ratchev |
239-246 |
Multi-agent Architecture for Reconfiguration of Precision Modular Assembly Systems
Pedro Ferreira, Niels Lohse, Svetan Ratchev |
247-254 |
Reconfigurable Self-optimising Handling System
Rainer Müller, Martin Riedel, Matthias Vette, Burkhard Corves, Martin Esser, Mathias Hüsing |
255-262 |
Modular and Generic Control Software System for Scalable Automation
Christian Brecher, Martin Freundt, Daniel Schöllhorn |
263-270 |
Agile Multi-parallel Micro Manufacturing Using a Grid of Equiplets
Erik Puik, Leo Moergestel |
271-282 |
Development of a Reconfigurable Fixture for the Automated Assembly and Disassembly of High Pressure Rotors for Rolls-Royce Aero Engines
Thomas Papastathis, Marco Ryll, Stuart Bone, Svetan Ratchev |
283-289 |
Micro-Factory
|
Architectures and Interfaces for a Micro Factory Concept
Niko Siltala, Riku Heikkilä, Asser Vuola, Reijo Tuokko |
293-300 |
Desktop Micro Forming System for Micro Pattern on the Metal Substrate
Hye-Jin Lee, Jung-Han Song, Sol-Kil Oh, Kyoung-Tae Kim, Nak-Kyu Lee, Geun-An Lee, Hyoung-Wook Lee, Andy Chu |
301-308 |
Miniaturization of Flexible Screwing Cell
Asser Vuola, Riku Heikkilä, Timo Prusi, Mikko Remes, Petri Rokka, Niko Siltala, Reijo Tuokko |
309-316 |
Micro-assembly Technology Studies
|
A Cooperation Model and Demand-Oriented ICT Infrastructure for SME Development and Production Networks in the Field of Microsystem Technology
Markus Dickerhof |
319-328 |
A Methodology for Evaluating the Technological Maturity of Micro and Nano Fabrication Processes
Emmanuel Brousseau, Richard Barton, Stefan Dimov, Samuel Bigot |
329-336 |
Function and Length Scale Integration Study in Emerging MST-Based Products
Samuel Bigot, Stefan Dimov, Roussi Minev |
337-342 |
